A quick and neat fixing with no splitting for a high-quality finish.
The new WIROX coating of SPAX offers 10 times higher corrosion protection in the neutral salt-spray fog test than the standard for conventional yellow zinc coating and has considerably higher surface hardness.
This makes it ideal for outdoor use in structures such as e.g. carports or pergolas, which are not directly exposed to the elements.
With a high anti-corrosion coating, these decking screws will look good for years without rusting.
With a razor-sharp cut point and ground, serrated lower thread, these screws will not split or splinter the wood even when used at the edge of the board.
The non-threaded section of the shank allows the two pieces to be pulled together tightly and the upper screw thread gives a vice-like effect locking the two boards together.
A T-STAR plus recess gives excellent torque transmission making these decking screws smooth and easy to drive. Milled ribs on the underside of the head trim away the screw hole giving a perfectly flush countersink.
Made in Germany, these decking screws are fast driving, strong and give a neat appearance to your work.
When ordering, as a rule of thumb, a 3m x 4m deck requires 400 screws on average.
If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!
- Pack Quantity: 500
- Length: 60mm
- Gauge: 4.5mm
- Head Type: Cylindrical
- Drive Type: Torx T20
- T20 screwdriver bit included
- Cylindrical head: low splitting effect, pulls flush into the wood
- SPAX typical ground serrations: quick and secure fastening
- Anti-corrosion coating
- No minimum order