eDecks Walksure Low Slip Deck Board is a slip-resistant product which combines EPDM rubber and pressure-treated softwood deck board.

The resulting product provides not only an attractive and colourful alternative to traditional timber decking but also a safe, slip-resistant surface in wet or dry conditions.

WalkSure® decking is PEFC certified and has a 15-year guarantee against rot and fungal decay, subject to correct installation and treatment of cut timber.

WalkSure® is rated as 'low potential for slip' tested to BS 7976 part 2

Importantly WalkSure achieves the 'low slip' rating in each of the three test procedures, across, diagonal to and along the board length.

If deck boards are cut, the sawn ends should be re-treated with a suitable timber preservative. Please allow a small percentage for waste.

Supports should be set at a maximum of 450mm centres. A slight fall should be incorporated into the design to help improve drainage.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

• Finished dimensions: 28mm x 120mm
• Colour: Charcoal / Red
• Pressure treated
• PEFC certified & Kiln dried timber
• Low noise
• Density: 800 kg/m3
• Other colours on request

• Residential decks
• Schools and playgrounds
• Suitable for commercial applications, i.e. public areas
• Industrial applications
• Smoking facilities
• Pubs, hotels and other leisure complexes
• Pool surrounds

eDecks Walksure Low Slip Deck Board is a slip-resistant product which combines EPDM rubber and pressure-treated softwood deck board.

The resulting product provides not only an attractive and colourful alternative to traditional timber decking but also a safe, slip-resistant surface in wet or dry conditions.

WalkSure® decking is PEFC certified and has a 15-year guarantee against rot and fungal decay, subject to correct installation and treatment of cut timber.

WalkSure® is rated as 'low potential for slip' tested to BS 7976 part 2

Importantly WalkSure achieves the 'low slip' rating in each of the three test procedures, across, diagonal to and along the board length.

If deck boards are cut, the sawn ends should be re-treated with a suitable timber preservative. Please allow a small percentage for waste.

Supports should be set at a maximum of 450mm centres. A slight fall should be incorporated into the design to help improve drainage.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

• Finished dimensions: 28mm x 120mm
• Colour: Buff / Brown
• Pressure treated
• PEFC certified & Kiln dried timber
• Low noise
• Density: 800 kg/m3
• Other colours on request

• Industrial applications
• Smoking facilities
• Pubs, hotels and other leisure complexes
• Pool surrounds

eDecks Walksure Low Slip Deck Board is a slip-resistant product which combines EPDM rubber and pressure-treated softwood deck board.

The resulting product provides not only an attractive and colourful alternative to traditional timber decking but also a safe, slip-resistant surface in wet or dry conditions.

WalkSure® decking is PEFC certified and has a 15-year guarantee against rot and fungal decay, subject to correct installation and treatment of cut timber.

WalkSure® is rated as 'low potential for slip' tested to BS 7976 part 2

Importantly WalkSure achieves the 'low slip' rating in each of the three test procedures, across, diagonal to and along the board length.

If deck boards are cut, the sawn ends should be re-treated with a suitable timber preservative. Please allow a small percentage for waste.

Supports should be set at a maximum of 450mm centres. A slight fall should be incorporated into the design to help improve drainage.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

• Finished dimensions: 28mm x 120mm
• Colour: Green / Buff
• Pressure treated
• PEFC certified & Kiln dried timber
• Low noise
• Density: 800 kg/m3
• Other colours on request

• Industrial applications
• Smoking facilities
• Pubs, hotels and other leisure complexes
• Pool surrounds

eDecks Walksure Low Slip Deck Board is a slip-resistant product which combines EPDM rubber and pressure-treated softwood deck board.

The resulting product provides not only an attractive and colourful alternative to traditional timber decking but also a safe, slip-resistant surface in wet or dry conditions.

Please note: Our cut-to-length service is done on a cross-cut saw, and the cuts can only be guaranteed to be as accurate as we possibly can within the capabilities of the saw.

Please double check you have measured these correctly as we cut these, especially to your requirements - hence we cannot accept returns.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!

• Finished dimensions: 28mm x 120mm
• Colour: Charcoal / Red
• Pressure treated
• PEFC certified & Kiln dried timber
• Low noise
• Density: 800 kg/m3
• Other colours on request

• Residential decks
• Schools and playgrounds
• Suitable for commercial applications, i.e. public areas
• Industrial applications
• Smoking facilities
• Pubs, hotels and other leisure complexes
• Pool surrounds
• Other colours on request

eDecks Walksure Low Slip Deck Board is a slip-resistant product which combines EPDM rubber and pressure-treated softwood deck board.

The resulting product provides not only an attractive and colourful alternative to traditional timber decking but also a safe, slip-resistant surface in wet or dry conditions.

Please note: Our cut-to-length service is done on a cross-cut saw, and the cuts can only be guaranteed to be as accurate as we possibly can within the capabilities of the saw.

Please double check you have measured these correctly as we cut these, especially to your requirements - hence we cannot accept returns.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!
 

• Finished dimensions: 28mm x 120mm
• Colour: Buff / Brown
• Pressure treated
• PEFC certified & Kiln dried timber
• Low noise
• Density: 800 kg/m3
• Other colours on request

• Industrial applications
• Smoking facilities
• Pubs, hotels and other leisure complexes
• Pool surrounds

eDecks Walksure Low Slip Deck Board is a slip-resistant product which combines EPDM rubber and pressure-treated softwood deck board.

The resulting product provides not only an attractive and colourful alternative to traditional timber decking but also a safe, slip-resistant surface in wet or dry conditions.

Please note: Our cut-to-length service is done on a cross-cut saw, and the cuts can only be guaranteed to be as accurate as we possibly can within the capabilities of the saw.

Please double check you have measured these correctly as we cut these, especially to your requirements - hence we cannot accept returns.

If you would like any more information on this product, please call the number at the top of this page and speak to our super efficient sales team now!
 

• Finished dimensions: 28mm x 120mm
• Colour: Green / Buff
• Pressure treated
• PEFC certified & Kiln dried timber
• Low noise
• Density: 800 kg/m3
• Other colours on request

• Industrial applications
• Smoking facilities
• Pubs, hotels and other leisure complexes
• Pool surrounds